New to DIY, and have questions about synthetic quilts?

** Please Note - This article may no longer be up to date. This Help Center is being left active for archival purposes.  For the most up-to-date info, please see our new Help Center at https://ripstopbytheroll.com/pages/help-center-main

 

We commonly get emails that have questions concerning every aspect of quilt making.  Typically, we answer about 5 per day. The questions are usually almost identical, so I selected one and will answer it here, to start what will eventually evolve into a total introduction into quilts. Please keep in mind there is a lot of opinion in this article.  I've been hammock camping for just about 14 years now, year round, in Upstate NY.

 

The original email: 
Hello. I'm just getting into DIY gear and I'd like to construct an under quilt and maybe a top quilt. I have a few questions. First, what is the difference between calendared and un-calendared material and which should I choose? Do I need waterproof material for my quilts? Finally, what weight APEX would be best for me. I don't camp in the depths of winter or the heat of August. Overnight lows for me typically range from 15F to maybe 50F. I'm a bit of a cold sleeper. Do I need 7.5oz APEX or do you think 5oz would do, if I wear more clothes on nights when it gets especially cold? Thank you! I hope to place an order soon.

 

The difference between calendered and uncalendered material, when dealing with synthetic quilts, comes down to wind resistance. All insulations, natural or synthetic, work by trapping pockets of air in between the fibers or feathers.  That stagnant air is what keeps you warm. Calendered materials have gone through an additional treatment to seal the gaps between the individual fibers of the weave. This makes the material much more wind resistant and helps keep that warm air in the quilt where it's needed. This is why, even with synthetic insulation, we recommend calendered fabric for quilts. 

 

But which calendered fabric? That depends on you, and where you camp, honestly. If you're rough on gear or like to hang low to the ground, I recommend something heavier duty like the 1.1 Ripstop Nylon or 1.6 HyperD Calendered. If you're looking for lightweight, the 0.66 MEMBRANE10, and 0.9 MEMBRANE15 are great options. The softest is the 1.0 HyperD. If you're looking for camouflage, then it's the 1.1 Poly calendered MARPAT or Woodland, or 1.55 Multicam. My personal favorite, for the outside of quilts, is the 0.9 MEMBRANE OutdoorINK printed fabric. We recommend ordering sample packs, so you can get a feel for a few fabrics before committing to yardage. 

You don't NEED a waterproof fabric for the outside of your quilt. A properly pitched tarp should keep you dry.  But if it's something you're worried about, check out the 0.74 oz MTN 7D. We do not recommend using it for both layers of the quilt, but it will do great on the outside if you're using a smaller tarp or camp in wet areas. 


Please keep in mind that ultralight weight materials typically under 0.9 oz per square yard, are typically not recommended for synthetic quilts. Those materials are designed to prioritize weight above all else, and they're usually targeted more towards users who understand and accept the trade off between weight and durability. The increased weight of synthetic insulation negates that trade off. 
 
If you need a quilt or blanket that will double as a ground cloth, picnic blanket, or have other forms of ground contact, check out the 1.6 HyperD PU4000 or 2.2 Hex70 PU3000 for the ground layer.  


Approximate temp ratings: 


Climashield: 
2.5 oz -   50o F
3.6 oz -   40o F
5.0 oz -   30o F
7.5 oz -   10o F
10  oz -  -5o F

Primaloft**:
3.0oz -    50°F
6.0oz -    30°F

 

One thing to note real quick.  These temps are estimates only.  There are a bunch of different factors that will affect how warm you sleep. We'll write an article on staying warm when camping, but in the meantime, check out this google search

 

** We do not recommend quilting through insulation, as this will compress the insulation, and create cold

spots.  So for larger projects, Primaloft would need to be used with quilting loops to keep the insulation in place. 

 

Underquilt temps

Concerning which insulation, if you're looking for a "One size fits all" Underquilt solution, then go with the material rated for the coldest temps you'd face.

A 10 oz filled underquilt will work in any temp, from +70 degrees, to -5. You can adjust the underquilt as needed in warmer temps, and still be comfortable.  

A topquilt, on the other hand, is more tuned to a specific temp range. You wouldn't want to use a heavyweight 10oz TQ in the summer. With a "one size fits all" TQ in mind, and a good place to start is the 5.0.  I use a 30 degree rated topquilt year-round and add additional insulation, like a fleece or wool blanket if I'm going colder. You can also utilize things like a hot water bottle, "Hot Hands" or a hammock sock to push your temps a little further.  

If you have any questions, please leave them as comments on this article. We do get notifications when someone comments, and that way, others will be able to see the answers to the specific questions you have. 

 

Material Widths

The widths of all materials are listed under the specs tab on the product pages. This will help if you'd like to estimate the weight. (See Below)

 

To estimate weight: 

The easiest way to ballpark the weight is to just add up the material weight, and multiply it by the number of square yards you are using. If you don't know the square yards, you can calculate the square inches, then divide by 1296 to calculate the square yards. 
 
For instance, if you're using 5.0 Apex, and 2 layers of 1.1 ripstop, the total weight would be 7.2oz/yd². If the quilt is going to be 60" long, x 40" wide, you'd use the following steps:
 
60"x40" = 2400"²
2400/1296 = 1.85 yd²
1.85 x 7.2oz/yd²= 13.32 ounces, approximate weight. (not including trim)
Was this article helpful?
5 out of 5 found this helpful

Comments

5 comments
  • I'm thinking about building another underquilt. The one I use now is down and is probably ok to 40-45 degrees. I'd like something to 30, which might suggest the 5oz climashield. When I do get cold hanging, it's usually my butt. So, to that end, I'm curious if there would be any value in a full length UQ with 5oz insulation in the head and foot 1/3 sections of the quilt and 7oz insulation in the middle 1/3 under my rear end?

    1
    Comment actions Permalink
  • Kip Owens, That is exactly what i did for a friend of mine. he gets cold ass so i put 5 oz on the ends oand 7.5 in the middle 3rd of his quilt. keep in mind that you will need to do some extra quilting length wise to keep the sections in place.

    0
    Comment actions Permalink
  • There are a lot of recommendations here for the outside layer textile, but nothing about the inner layer. Waterproof/breathable? Favorites regarding feel?

    0
    Comment actions Permalink
  • The inner layer doesn't really face the elements, so a breathable material is typically recommended. Our 1.0 HyperD (uncalendered if using Climashield) is my personal favorite.

    0
    Comment actions Permalink
  • How compressible is the Climashield compared to down? I have a sleeping bag compartment on my backpack and want to know if a TQ made from 7.5oz will fit.

    0
    Comment actions Permalink

Please sign in to leave a comment.